شرح أهم اعطال لجميع أنواع ال بي بي فايف

[خالد الشبول]

شرح أهم عطلان لجميع أنواع ال بي بي فايف

وهما

1. SuperDongle Repair
2. Security Test Failed
========================
المشكلة الأولى
1. SuperDongle Repair
--------------------
الجهاز يعيد تشغيل بعد فترة 3 دقائق أو أكثر ويسموها سوبر دونغل

وعند تشييك الجهاز إذا ظهر لك أحد الأخطاء التالية

SIMLOCK invalid!
SUPERDONGLE_KEY invalid!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST failed!
SECURITY_TEST passed

في هذه الحالة يجب عمل التالي

a.press repair Super Dongle

b.then SD Auth PM

c.then good pm including fields pm1 and pm309
------------------------------------------------------
أو عند تشييك الجهاز ظهرت أحد الرسائل التالية
SIMLOCK passed!
SUPERDONGLE_KEY passed!
- WD timer enabled, phone will reboot itself after 3 min.
SIMLOCK_TEST passed
SECURITY_TEST passed

فعليك عمل التالي

a.press repair Super Dongle

b.than SD Auth PM

c.than good pm including fields pm1 and pm309
==============================

المشكلة الثانية
2. Security test Failed
-----------------
عند تشييك الجهاز تظهر أحد الرسائل التالية
SIMLOCK passed!
SUPERDONGLE_KEY passed!
SIMLOCK_TEST passed
SECURITY_TEST failed

في هذ الحالة عليك عمل التالي

a. first of all Do SX4 than PM1 and PM309

إذا لم تنجح الأولى إعمل التالي

b.press repair SL

c. replace CCC and HWC cert of RPL from same model and write it back to ur phone than repeat the SX4 + pm process

========================
هنا أيضاً بعض الحلول
HERE THE SOLUTION FOR NOKIA 7210C CONTACT SERVICE
If after repair SD and/or Simlock (Super Dongle RPL and Simlock RPL upload) you get "SECURITY_TEST failed!" and/or "warning: SD authorized but verify failed!".
This is comming usually because some PM fields and/or RPL sections are missing from your phone (e.g. DRM keys, CCC, ...).

Solution 1 (easy way, maybe not work all time, depends how phone was damaged):
- write full PM from SAME phone model (product number) WITHOUT fields 1, 308, 309 (and WITHOUT field 120 for SL20 ****d phones)
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

if still have problems, use Solution 2:

- backup RPL (NPC, CCC, HWC, ...), will call this ORIGINAL RPL
- backup RPL from another working phone (same model) with SAME product code
- edit this good RPL from another phone and remove NPC section (all lines who start with NPC_DATA_1 ... NPC_DATA_xx), will call this edited file CLONE RPL
- backup full PM from another working phone (same model) with SAME product code, will call this file CLONE PM
- full erase flash chip (use erase file regarding flash chip size)
- flash phone (CMT, APE, ...)
- upload CLONE RPL
- upload ORIGINAL RPL
- write full CLONE PM without fields 1,120,308,309
- unplug/replug phone from JAF/UFS box
- make Simlock RPL repair
- make SD RPL repair
- unplug/replug phone from JAF/UFS box
- make SUPER SX4 Auth then write PM1 and PM309

 

 

[محمد الطوباسي]

جـهـد مـمـيـز يـا غـالـي
الله يـعـطـيـك الـعـافـيــة

[زياد البيروتي]

تسلم الايادي اخي الغالي