DM500 HD with flash DreamUp Unplug the Dreambox is the first network Start the program "DreamUp" Please select the Com port to which your Dreambox is connected Selection: network / network without if network: enter local IP of the PC, enter third-IP for the box the "Connect" button, click and then the power cord then plug the box Please wait while now after the flash loader is transferred to the box, select the Button box flashing "from the operating software Select the firmware and click "open" The upload is started, please wait Box copies the new operating software into the flash memory, please wait "The box was flashed successfully," click on "OK" Click on "Disconnect / then Exit Box restart...