Imagenes Parcheadas para 800HD dm800HD Clon.(chinos)

[abu.kaled]

[Clones]NewNigma2 v2.8.4 [SS70] Patched by -=Ce|edon.EUS=-

################################################## ##
Newnigma2 team proudly presents:
Newnigma2 v2.8.4
################################################## ##

Basics:

* Enigma2 2.6: 19.02.2010
* Enigma2 Plugins 2.6: 19.02.2010
* Newnigma2 Plugins: 19.02.2010



DM 800 HD PVR

* driver: 17.01.2010
* secondstage: 70


Changelog:

* new plugin
Blue Button -> Newnigma2 Services -> System Tools -> Expert Menu
Here you can allow to install Picons into the flash, or you can activate the picondebug (missing picons will be added to "the
missing-skin-hd-picons.txt" file).
* new option:
Menu Button - Settings -> System -> Harddisk -> Harddisk Settings
Here can set the USB harddisk in the standby modus. standby settings are from 10 seconds to 4 hours valid.
* keymap: neutrino and neutrino_half:
shift + 1 = power on from standby.
* config-saver:
crashes with the SD-Skins are fixed.
* nfs-server:
NFSD-modul will be now loaded at startup, this fixes errors in 2.8.3.
* opkg:
installation and unintall of plugins now works properly. There were some problems with 2.8.3.
* picon-hd-skin: fixes
SKY Bundesliga Picons are now shown on all feeds. Some picons are completely rebuilded. The 3D picons are completly new.
* new skins:
only support for skins, that are on the feed.




IMPORTANT

It is possible to update from 2.8.3 to 2.8.4 via Softwareupdate or console.

With the release of our 2.8.3 image there have been introduced some quite generic changes, for example: it was not possible to install picons to flash, or the linking of USB-Memory-Sticks was removed. With the current 2.8.4 image these kind of changes were further extended.

DM800 users can now install the picons in the flash again. But be carefully there is limited space avaible. DM8000 can install the picons to the flash too, there will be a Picon folder in the root of the image, DM8000 has enough space to store picons in flash.

The linking of of devices like an usb stick in the devicemanager is gone. There were too much problems with linking devices. Some little plugins are not work anymore, but its known. You can change the record path in the menu: settings -> system - record path, here you can change all you need.

Code:
http://www.4shared.com/file/226549336/c3ab8a87/Newnigma_284_Patched_by_-Celed.html

[abu.kaled]

Clone image DM500HD
MAXHD DM500HD clone

NABILO 0.12 WORKING EXCELENT !!!!!

Patched image has secondstage bootloader 72.
Some older DM-800 made in China doesnt accept this bootloader.
In such case you have to reflash bootloader to lower version.

Code:
http://www.megaupload.com/?d=1E5TCDC6

[abu.kaled]

New newnigma2 v2.8.4 SSL72 TS Patched ssl72

Code:
http://rapidshare.com/files/357668843/newnigma2-release-dm800-v2.8.4_SSL72_TS.rar

[abu.kaled]

EDG-Nemesis-1.0-dm800-SSL72_TSv2

ssl70 to load the image after loading ssl70 and then restart the decoder
tested by me .. and it works

on your responsibilities

Code:
http://www.megaupload.com/?d=BTMLYWW8

[abu.kaled]

Image Satonlines for DM800 SS-75 (Only for use with the new version Sim2 Clones)

OE Build Configuration:
BB_VERSION = "1.6.8"
OE_REVISION = "<10>"
TARGET_ARCH = "mipsel"
TARGET_OS = "linux"
MACHINE = "dm800"
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
TARGET_FPU = "soft"

CCcam 2.1.4
MultiEPGCCcamInfo
MgCamd
skin HD-Glass13_2.1
Correction Bug webInterface
Ajout Picon
Picon Provider
Picon Sat


http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://www.redimg.net/A/10/03/1/1xx74r.jpg (http://www.redimg.net/A/10/03/1/1xx74r.jpg)http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://www.redimg.net/A/10/03/1/2up24d.jpg (http://www.redimg.net/A/10/03/1/2up24d.jpg)http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://www.redimg.net/A/10/03/1/3jv73o.jpg (http://www.redimg.net/A/10/03/1/3jv73o.jpg)http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://www.redimg.net/A/10/03/1/4zw78f.jpg (http://www.redimg.net/A/10/03/1/4zw78f.jpg)



Code:
http://hotfile.com/dl/32572206/1c0c560/Satonlines-dm800-15-02-2010-SS-75.rar.html

[abu.kaled]

Image Satonlines V2 for DM800 clone ss72 - 18.03.2010

The image Satonlines V2 came out with also language FR

Version = V2
OS = linux
Demo = DM800
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
Language = EN


Extensions:
- CutListEditor
- Glass12setup
- GraphMultiEPG
- MediaPlayer
- MediaScanner
- PicturePlayer
- Tuxtxt
- WebInterface

SystemPlugins:
- CleanupWizard
- CrashlogAutoSubmit
- FrontprocessorUpgrade
- Hotplug
- NetworkWizard
- PositionerSetup
- Satfinder
- SkinSelector
- SoftwareManager
- Videomodes
- VideoTune
- WirelessLan

Code:
http://www.4shared.com/file/244063351/1fd582bb/SatonlinesV2-Off.html
(http://www.sat-universe.com/redirector.php?url=http%3A%2F%2Fwww.4shared.com%2F file%2F244063351%2F1fd582bb%2FSatonlinesV2-Off.html)
(http://www.sat-universe.com/redirector.php?url=http%3A%2F%2Fwww.4shared.com%2F file%2F244063351%2F1fd582bb%2FSatonlinesV2-Off.html)

[abu.kaled]

Image Satonlines V2 for DM800 clone ss72 - 18.03.2010

The image Satonlines V2 came out with also language FR

Version = V2
OS = linux
Demo = DM800
DISTRO = "opendreambox"
DISTRO_VERSION = "1.5.0"
Language = EN


Extensions:
- CutListEditor
- Glass12setup
- GraphMultiEPG
- MediaPlayer
- MediaScanner
- PicturePlayer
- Tuxtxt
- WebInterface

SystemPlugins:
- CleanupWizard
- CrashlogAutoSubmit
- FrontprocessorUpgrade
- Hotplug
- NetworkWizard
- PositionerSetup
- Satfinder
- SkinSelector
- SoftwareManager
- Videomodes
- VideoTune
- WirelessLan
Code:
http://www.4shared.com/file/244063351/1fd582bb/SatonlinesV2-Off.html

[abu.kaled]

-lean-dm800-3018--72 http://img87.imageshack.us/img87/2301/45982579.jpg (http://img87.imageshack.us/img87/2301/45982579.jpg)

by ramiMAHER

On 18.03.2010


PHP Code:
18.03.2010 Enigma²:cool:

Secondstage Bootloader 72

Drivers 2010.01.17

new Bootlogo

Code:
http://www.uploadmirrors.com/download/1A9DFAPW/OoZooN-CVS-lean-dm800-3018-ramiMAHER-SL-72_1.rar

[abu.kaled]

http://i44.tinypic.com/izqao3.png (http://i44.tinypic.com/izqao3.png)

Code:
http://www.megaupload.com/?d=GM31O3FZ

[abu.kaled]

OoZooN CVS full dm800 sim2 #75 2010.04.15(1)

•Hier kommt wieder ein release Image aus dem Enigma² "stable 2.8.1" OE 1.5 zweig.
　　•Enigma stand ist 14.04.2010
　　•die plugins sind vom 02.04.2010
　　•die treiber vom 14.04.2010
　　•neuer kernel 2.6.12.6-r14
　　•secondstageloader ist 75
　　•änderungen an Enigma² können Hier verfolgt werden

　　•dieses image ist in zwei versionen verfügbar: lean und full. das lean ist 30,3 mb, das full 40,9 mb gross.
　　•alles was im lean entfernt wurde, kann über den plugin-download nachinstalliert und auch wieder deinstalliert! werden
　　•die full-version enthält alle aufgeführten plugins sowie benötige libs und ist für alle gedacht, die ihre box nicht online haben
　　•diese können natürlich alle plugins deinstallieren, die sie nicht benötigen.


　　•meine änderungen am oe:


　　•eigene bootlogo‘s, artwork von clumsy
　　•mit satellites.xml - enigma² by Reinh@rd
　　•zusätzliche kernelmodule cdfs, ntfs, usbseriell, ftdi-sio und pl2303
　　•änderung des dccamd start
　　•dccamd nicht im image enthalten, kann online nachinstalliert werden


　　•(*) in full und lean enthalten
　　•(**) nur im full enthalten
　　•(***) über den plugin-download verfügbar


　　•systemplugins:


　　•autoresolution (***)
　　•cleanupwizard (***)
　　•crashlogautosubmit (***)
　　•defaultservicesscanner (*)
　　•diseqctester (***)
　　•hotplug (**)
　　•ledmanager (***)
　　•networkbrowser (**)
　　•networkserver (***)
　　•networkwizard (*)
　　•positionersetup (*)
　　•satelliteeditor (***)
　　•satelliteequipmentcontrol (*)
　　•satfinder (*)
　　•serviceeditor (***)
　　•setpasswd (***)
　　•skinselector (*)
　　•softwaremanager (**)
　　•startupservice (***)
　　•videoenhancement (***)
　　•videomode (*)
　　•videotune (*)
　　•wirelesslan (*)


　　•plugins:


　　•audiosync (*)
　　•aioscreengrabber (**)
　　•antiscrollbar (***)
　　•ardmediathek (***)
　　•autodimm (***)
　　•autotimer (**)
　　•babelzapper (***)
　　•backgroundswitcher (***)
　　•barryallen (***)
　　•buliticker (***)
　　•bwmon (***)
　　•captain-shell (***)
　　•cdinfo (**)
　　•covermanager (***)
　　•cronmanager (***)

Free DM800 Image
Code:
http://www.hostingcup.com/kn1y9xzab3ln.html

[abu.kaled]

23-04-2010

OpenPLi Unstable for DM800 HD clone SiM2.01 + ss75

Code:
http://hotfile.com/dl/39457602/91e8c85/sim201e-75-OpenPLi-unstable-dm800-20100423.rar.html

[abu.kaled]

23-04-2010

Newnigma2 Snapshot OE16 for DM800 HD clone SiM2.01 + ss75

Code:
http://hotfile.com/dl/39459674/68e8393/sim201e-75-newnigma2-snapshot-OE16-dm800-20100423030549.rar.html

[abu.kaled]

SIM201E-75-LT-Sixth SENSE SP1.-DM800.nfi New

ust patched this new LT image runs nice and smooth on my Sim2.01 SSL75

yes, we are still alive
We have nearly rewritten the complete LT Image, so it took us some time. Our
priorities has always been our real life and this is also one reason why it
took some time for LT6.

The new image is not dictatorial any more. We have splitted all the LT
plugins from the base image... so YOU can now use this and that LT plugin or
not.

We have a new built in skin for the HD boxes named LT6.HD. We hope, you will
like it like we do.
As a note on the skin, we have left rather much PiG in it for dm800 box and
this might make the skin feel little slow. For future upgrades the dm800
skin might use less PiG to speed it up. For you who likes PiG and do not
care about speed you can change the skin to full PiG.

As you know us, we have again a few new plugins for you.

The first new plugin is named LT Install Wizard. It will be executed the
first time you boot our image. You can remove or add any LT plugin inside
it. After the first boot it will not be shown again on bootup, but you can
reach it in the system menu again.

We have also a new plugin that allows you to switch the PiP channel without
a big patch to DMM's code that some other images are using. After the PiP is
enabled you can toggle between the main window and PiP with the following
buttons:
-New remote control (DM8000): SHIFT+PLAY/PAUSE
-old remote control: SHIFT+TV

Some user didn't find their location in our Weatherman plugin, so we created
a new one: Weather-Channel with some new options and an other look.

We have changed a lot of stuff in many plugins, so we will try to pick only
the important things for the release text:
-Remove LT center screen functions and use DMM's code instead
-Made SNR configurable in the skin (percent or dB)
-New weather icons and new look for Weatherman plugin
-Added possibility to show infos about next event in the channelselection
-Move LT-Configs to dmm-config menu (menu => configuration => system)
-Added reload autofs function to autofs editor
-Made info-button also configurable (not only long-holding info-button)
-Added 'Play CD/DVD' entry to main-menu
-Remove entry DVD Player from main-menu
-Added FileScanner for Audio-CD's
-After starting 'Play CD/DVD' check CD/DVD. Open DVD-Player if a DVD, open
MC-Audio-Player if an Audio-CD and open MC-DVD-Browser if nothing of them
(for DATA-CD's with pics, mp3 or movies)
-InfoBarPositioner: added posibility to move the MoviePlayer InfoBar
-Allow skin to show following things in the ChannelSelection screen:
ServiceName, Orbital, ServiceNameOrbital
-Allow to edit ConfigText configs with the VirtualKeyboard
-Bootup Music plugin uses now gstreamer instead of mpg321
-Many other changes and fixes


Changes MediaCenter:
-Show/play iso files using the DVD-Player plugin
-Calculate some sizes in the media-list
-Added possibility to SHOUTcast to navigate with the number buttons to the
genres (like the channelselection)
-Added some podcast stations. Thx to Zeranovsky
-Show mp4 in media-list and new config: transcode mp4 (yes/no)


Changes QuickMenu:
-Add plugin
-Add script
-Remove entry
-Restore defaults
-Select pre-configured setup
-Save current menu
-Toggle script show type (hidden or shown)
-Add plugin to extensions-menu
-Remove plugin from extensions-menu (this one needs an e2 restart)
-Added move entry function


New in LTEpgGrabber
-AutoGrab - grab from bouquets instead of configs. Select preferred grabbers
and languages and AutoGrab will do the rest.
-The grabber now autodetects when daylight-savings time (DST) changes and
clears cache (no need to edit configs anymore)
-new timezone rules (Use GMT-zone where you are grabbing from...)
-Encoding support for all ISO-8859 standards and utf-8 (first-third byte of
all descriptors text fields)
-Comply with ETSI EN 300 468 v1.9.1 Annex A.2 regarding encoding
-Added support for one-based index (OD) for grabbers
-added possibility to provide "shortInfo" from external grabbers
-support for shortInfo (experimental) in: dagenstv_no and drdk
-new format for grabber-configs


Changes in LTEpgGrabber
-Insert the appropriate language-code in descriptors (not always "swe")
-added execution-time in print-outs and logs
-fixed bug in almost all grabbers were zero-sized file was written in /tmp
and not deleted
-removed init 4 & 3 from grabber-scripts (uses web-if instead)
-ExternalEpg-plugin now uses eEPGCache.load() instead of TryQuitMainloop
(much faster )
-renamed "tvguide.co.uk.xml" to "uk_tvguide.xml"
-renamed "radiotimes.com.xml" to uk_radiotimes.xml

new grabbers:
-xmltv_bleb
-html_dagenstv_no
-html_tvplaneten

new configs:
-nordic_mspc.xml
-nordic_dagenstv_no.xml
-nordic_tvplaneten.xml
-it_ambrosa.xml

New in LTEpgGrab plugin
-Option to save log-file to CF/USB
-Option to grab every (n) days (updates crontab)
-Option to use AutoGrab
-Blue button:
Clear Cache
Edit AutoGrab config
Create Grabber config



we would like to express our thanks to ghost, tmbinc, and acid_burn
and also all the beta testers for their hard work

We hope, you will enjoy the new LT6 The Sixth Sense images and we wish you a happy new year.

-----------------------------------------------------------

26.04.2010

T6 DM800 SIXTH SENSE SP1

LT TEAM PROUDLY PRESENTS LT6 SIXTH SENSE SP1

WHATS NEW IN SERVICE PACK ONE

* MediaCenter changed default path for movies.
* LT CAM Installer
* Drivers 20100414 for both dm800 and dm8000
* Secondstage #75 for dm800 and #76 for dm8000
* Menus on dm800 should now be faster

Of course there has been lots of other updates/bugfixes to.

Enjoy lt6 sixth sense SP1 please post feed back on our forums.
A big thankyou to all beta testers for their hard work



We would like to express our thanks to ghost, tmbinc, and acid_burn

ENJOY OUR IMAGE: LT TEAM

Code:
http://rapidshare.com/files/381111845/SIM201E-75-LT-Sixth.1-DM800.nfi

[abu.kaled]

pli-jade3-6705-dm800-SIM1-SND70



Drivers included: 2010 04 14 (all drivers, no downgrade)
Secondstage: 70

Code:
http://www.megaupload.com/?d=UN791CV0

[abu.kaled]

Exclusive first OoZooN img Working dm800 clone


Code:

Exclusive first img Working dm800 clone

In the last few days Become all the new img

Do not work on clone

Img, but has been modified to run on dm800 clone

OoZooN-image-dm800-2010-5-2

by ramiMAHER
Code:
http://www.megaupload.com/?d=TB2G5433

[abu.kaled]

OpenPLi-unstable-OE1.6-dm800-5-7


new boot logo




Have been added emu cccam


by ramiMAHER

Code:
http://www.megaupload.com/?d=5NGENNIG

[abu.kaled]

OoZooN-Image-dm800-OE1.6 -2010-5-8


http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://img688.imageshack.us/img688/9456/bootlogo.jpg (http://img688.imageshack.us/img688/9456/bootlogo.jpg)

Code:
http://www.multiupload.com/FIBUOEZHW9

[abu.kaled]

Exclusive Expected Dream Elite BH 1.3.3 OE1.6 DM800 sim2 #76

Exclusive I was able to break this to enlarge the monopoly of the original source
The policy of the image only works with all the features on the internal flash



Now working on the internal and external flash and all the properties of photo work

http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://img215.imageshack.us/img215/9456/bootlogo.jpg (http://img215.imageshack.us/img215/9456/bootlogo.jpg)


My signature has been developed within the image


http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://img339.imageshack.us/img339/6352/59990393.jpg (http://img339.imageshack.us/img339/6352/59990393.jpg)


Here are the properties of photo work has been tested Imo Sassy cam , everything works


http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://img38.imageshack.us/img38/8231/45797808.jpg (http://img38.imageshack.us/img38/8231/45797808.jpg)


by ramiMAHER

Code:
http://www.multiupload.com/BIXAH66Q4I

[abu.kaled]

OoZooN-Image-dm800-Sim2.01-2010-6-5-#76


http://www.world-sattv.com/vbulletin/highslide/graphics/warning.gif
http://img17.imageshack.us/img17/4181/71724473.jpg (http://img17.imageshack.us/img17/4181/71724473.jpg)


by ramiMAHER

Code:
http://www.multiupload.com/RS_6QOG6OHG6U

[abu.kaled]

patched drivers for dm800 clone latest

dm800-sim201-dreambox-dvb-modules_2.6.18-7.3-dm800-20100605

Tested successfully with ooZoon 5-6-2010-sim201-bl76 in flash

use at your own risk

These drivers are working and tested successfully and depend on sim201 bootloader 76 only

installation to flash image with bl75 should be after upgrading to bl76
install as any other ipk file
Program dcc-tools-packages-upload package

files date 5-6-2010 except tuner file 14-4-2010

The features of original drivers are
update dm800/dm8000/dm500hd drivers
- fixes load averrage
- add support for three vtuner modes, small vtuner fixes (i.e. return codes for some ioctls)

Code:
http://www.megaupload.com/?d=UTFWHZF9